ICASSP 2022 - Source Separation
This is a brief scan for ICASSP papers, searched with “source separation” (not all papers).
사용 환경 : virtualbox + ubuntu server 20.04 + i3 + st-luke
순정 i3를 쓸 거면 apt 사용해서 그냥 설치하면 된다.
sudo apt install i3
난 i3-gaps를 쓸 것이기 때문에 i3-gaps를 빌드해서 설치했고, 다음 페이지를 참고했다.
https://dymaxionkim.github.io/beautiful-jekyll/2019-06-20-rounded-i3-gaps-on-ubuntu/
https://gist.github.com/boreycutts/6417980039760d9d9dac0dd2148d4783
i3 설정은 ~/.config/i3/config 에서 하면 된다.
디폴트로 깔려있는 터미널 쓰기 싫어서 st 를 깔았는데 scrollback이나 기본적인 세팅이 되어있는 버전이 있어서 그걸 사용했다.
git clone https://github.com/LukeSmithxyz/st.git
cd st
apt install libx11-dev fontconfig libxft-dev libharfbuzz-dev
sudo make install
설정은 config.h를 수정하고 새로 빌드하면 된다.
virtualbox에서 clipboard 공유 기능이 작동하지 않을 것인데 아래 방법으로 설치하고 재부팅하면 VBoxClient가 설치되어 있을 것이고 VBoxClient –clipboard를 하면 클립보드가 작동할 것이다. /dev/cdrom은 버추얼박스에서 게스트 확장 설치를 누르면 생긴다.
작동이 안된다면 st 설정에서 ctrl+insert 로 복사하는 키 설정을 했는지 확인해보자.
sudo mkdir /mnt/cdrom
sudo mount /dev/cdrom /mnt/cdrom
sudo sh ./VBoxLinuxAdditions.run
polybar 같은 건 필요한 경우 찾아서 설치하면 된다.
startx 로 i3 실행할 때 VBoxClient-all 실행하고 단축키 설정하고 그런 건 적당히 찾아가면서 하면 된다.
내 설정 파일은 https://github.com/jc5201/configs 에 있다.
This is a brief scan for ICASSP papers, searched with “source separation” (not all papers).
사용 환경 : virtualbox + ubuntu server 20.04 + i3 + st-luke
title content —– ‘’’ code ‘’’